Whether you have an above ground pool or an inflatable pool, it is always essential to check chlorine levels to prevent the formation of algae and bacteria. The ideal free chlorine range is 2.0-4.0ppm. If the levels of free chlorine are too high water may develop an odour and swimmers may experience eye and skin irritation. If free chlorine levels are too low, disinfection will not occur. This is also important that pH levels and total alkalinity is also carefully monitored to prevent any further water issues or skin irritation. Don’t worry if this all sounds too complicated, follow our simple guide on how to check chlorine levels.

The Flowclear™ Pool & Spa Test Strips are the ideal solution for basic pool and spa water testing. Its 3-in-1 test strips will help you measure Free Chlorine 0 to 10 ppm, Alkalinity 0 to 240 ppm and pH 6.2 to 8.4 with instant results. The package contains 50 strips with an easy-to-use colour-match system which allows you to accurately check and measure all the levels required to keep your pool sanitised and healthy.

The test strips can be simply dipped into the water below the surface and then immediately removed. After 15 seconds you will see the results on the strip and compare them with the easy colour match chart on the bottle. The strips have a shelf-life of 18 months, so that you can use them for two consecutive summers, though the strips should be stored in a cool, dry place, preferably indoors, since extreme heat and moisture could reduce the shelf-life of the strips.

With these easy-to-use test strips you will always be sure that your pool has the right level of chlorine to make your experience in the pool as healthy and enjoyable as possible.